Endress+Hauser Prothermo NMT81 Mode D'emploi page 46

Description des paramètres de l' a ppareil
Element type
Navigation
Affichage
Réglage usine
Threshold short element
Navigation
Description
Entrée
Réglage usine
Threshold open element
Navigation
Description
Entrée
Réglage usine
46
Sous-menu "Element settings"
Navigation  Application → Capteur → Element set.
 Application → Capteur → Element set. → Element type
• Pt100, IEC751, α=0.00385
• Pt100, Canadian, α=0.00389
• Pt100, GOST, α=0.00391
• Cu100, GOST, α=0.00428
• Ni100, GOST, α=0.00617
• Custom
Pt100, IEC751, α=0.00385
 Application → Capteur → Element set. → Threshold short
Defines the threshold value from which the electronic will consider the element as open or
short.
0 ... 100 Ohm
3,0 Ohm
 Application → Capteur → Element set. → Threshold open
Defines the threshold value from which the electronic will consider the element as open or
short.
100 ... 1 000 Ohm
600 Ohm
Prothermo NMT81



Endress+Hauser