Cleaning; Fault/Remedy - ADE WS 1704 Mode D'emploi

Cleaning

1. During operation via the mains: Pull the mains adaptor
plug out of the base station.
2. Using a lightly dampened cloth, wipe the base station
and wireless outdoor sensor clean, as needed.
3. Dry the device completely before you reconnect it with
the mains adaptor.

Fault/Remedy

Fault
The DCF77 signal for the
time cannot be received.
Temperature indication
of the outdoor sensor
appears too high.
Instead of showing the
measured values for
temperature or humidity,
the display shows H.HH or
LL.L.
Weather Station with Wireless Outdoor Sensor WS 1704
Possible Cause
‚ Check the chosen
location.
‚ Start the signal
reception manually, if
necessary.
‚ Adjust the time
manually.
‚ Check whether the
outdoor sensor is
exposed to direct
sunlight.
‚ The values lie
above or below the
measurement range.
83