Display Light; Mains Operation; Set Brightness; Cleaning - ADE WC 1600 Mode D'emploi

Display light

Battery operation
− Press the SNOOZE/LIGHT button to switch on
the display light of the base station for approx.
15 seconds.

Mains operation

If you operate the base station using the mains adaptor
over the mains supply, the display is permanently lit.

Set brightness

− Set the BACKLIGHT slide control to the desired
brightness level.
HI = High brightness
LO = Low brightness

Cleaning

1. During operation via the mains: Pull the mains adaptor
plug out of the base station.
2. As necessary, wipe the base station and the outdoor
sensor clean with a lightly-dampened cloth.
3. Dry the device completely before you reconnect it with
the mains adaptor.
Weather Station with Wireless Outdoor Sensor WS 1600
71