Cleaning; Fault/Remedy - ADE WS 1601 Mode D'emploi

Cleaning

1. During operation via the mains: Pull the mains adaptor
plug out of the base station.
2. As necessary, wipe the base station and the outdoor
sensor clean with a lightly-dampened cloth.
3. Dry the device completely before you reconnect it with
the mains adaptor.

Fault/Remedy

Fault
The DCF77 signal for the
time cannot be received.
The temperature informa-
tion of the sensor seems
too high.
Instead of showing the
measured values for tem-
perature or humidity, the
display shows H.HH or LL.L.
Weather Station with Wireless Outdoor Sensor WS 1601
Possible Cause
‚ Check the chosen
location.
‚ Start the signal recep-
tion manually, if neces-
sary.
‚ Adjust the time man-
ually.
‚ Check whether the sen-
sor has been exposed
to direct sunlight.
‚ The values lie above
or below the measure-
ment range.
65