Updating Guide - Hofmann geodyna 9000p Mode D'emploi

UPDATING GUIDE

B
Re Release:______ le as
PCN:____________________
Accessories section:
Standard Caliper EAA0247G21A for rim width; removed.
_____________________________________________________________________
iv
________ Sept 2019
19G0166
DISCLAIMER OF WARRANTIES AND
LIMITATIONS OF LIABILITIES
While the authors have taken care in the preparation
of this manual, nothing contained herein:
- modifies or alters in any way the standard
terms and conditions of the purchase, lease or
rental agreement under the terms of which the
equipment to which this manual relates was
acquired, nor increases in any way the liability
to the customer or to third parties.
TO THE READER
While every effort has been made to ensure that
the information contained in this manual is correct,
complete and up-to date, the right to change any part
of this document at any time without prior notice is
reserved.
The equipment shall be considered an aid to the
operator in carrying out wheel analysis.
The operator, based on the assessments suggested
by the equipment and on his visual inspection of the
wheel, backed up by his own experience, remains the
only person responsible for the choices made and
therefore is responsible for the fi nal action taken on
the wheels.
Before installing, maintaining or
operating this unit, please read this
manual carefully, paying extra attention
to the safety warnings and precautions.
All Information in this manual has been supplied by
the producer of the equipment:
Snap-on Equipment Srl a unico socio
Via Provinciale per Carpi, 33
42015 CORREGGIO (RE) ITALY
Tel. +39-(0)522-733480
Fax +39-(0)522-733479
E-mail: corrcs@snapon.com
Internet: http://www.snapon-equipment.eu