Patek Philippe 26-330 S C J SE Mode D'emploi page 7

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 12
CAUTION
Please wind the watch and set the time before
you put the watch on. This prevents lateral
pressure on the winding stem. Please use
your fingernails to pull the crown out and
turn it gently between two fingertips.
Never pull out the crown in a humid envi-
ronment or underwater: the water resist-
ance of your watch is assured only when
the crown is pushed home.
Correction push pieces should be actuated
exclusively with the correction stylus that
was delivered with the watch. The use of
any other tool could damage your timepiece.
If your watch has stopped running, rewind
it by hand before performing any correc-
tions or adjustments (about 10 clockwise
turns of the crown).
To keep your watch running smoothly, we
recommend that you do not adjust the date,
day, or week number between 9.00 p.m.
and 12.30 a.m. Should you adjust the watch
between these times, there would be no
risk of damaging the watch mechanism.
Every year, the date must be corrected five
times – at the end of each month that has
fewer than 31 days.
10
DATE CORRECTION
To set the date , pull the crown out gently to posi-
tion 2 and turn it clockwise until the correct date
appears in the aperture. Once you have set the date,
push the crown home again.
DAY-OF-WEEK CORRECTION
To set the day of the week , actuate the correction
push piece
at 8 o'clock as many times as needed
to display the current day.
11

Publicité

Table des Matières
loading

Table des Matières