Open Window Detection - Sonnenkonig GLASKON 1000 Mode D'emploi

Masquer les pouces

Table Des Matières

Table des Matières

Les langues disponibles

Programme Mode

Selection of the week

After you have selected the programme mode, you can press the „P" key on the control panel to set the week from

Monday to Sunday. Press „+" or „-" to select another day. An

again to confirm the selection.

Time setting

If you press „P" again to confirm the selection of the day, the time is set automatically. The „Hour" position flashes,

you can set the hour by pressing „+" and „-". Each time is adjusted by one hour.

Press „P" again to confirm the hour, at the same time the automatic setting of the minute is activated. The „Minute"

position flashes, you can push through and set the minutes with „+" and „-". Each time is adjusted by one minute.

Setting the working mode for each hour

After finishing the time setting, press the „P" key again to set a weekly or 24-hour programme.

Press the „Mode" key to select different modes, press the „+" and „-" keys to select different hours. Press the

„Mode" button for three seconds to access the „P1", „P2", „P3" and „P4" modes and press the „+" and „-" buttons to

select. Each symbol corresponds to the respective working

mode as shown below:

When you have finished selecting the working mode, press

„P" to confirm and at the same time the next hour mode is

set.

After setting the working mode of each hour for one day, you

can press „P" again to confirm and set the working mode for

the second and third day.... When you have finished setting

the working mode for a week, press „P" again to return to

the current working mode and the heater will start working

according to the programme you have set.