Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Installing Worktop
Side Support Bracket
Parts Needed.
2 X Lock Nut
(1/4")
4 X Washer
(1/4")
Align bracket holes with locker holes
2
and insert hex bolts through holes.
4
Use #8 x 5/8" wood screws and washers,
provided in the locker packaging.
X2
18
1
2 X Hex Bolt
(.25" x 5/8")
4 x Wood Screw
#8 x 5/8
Note: Support Bracket included with Lockers
A support bracket is to be used if the worktop is
added to the set without a secondary supporting
base/tool cabinet.
Open locker doors and locate holes on either side.
3
Tighten nuts & bolts.
X2
5
X4
X2
Publicité
Table des Matières
