Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Securing Cabinets on
Studded Wall
Use stud finder to locate the studs
1
and mark the wall with a pencil.
Place cabinet tight
3
against the wall.
Pre-drill (4) 1/4" (6.5mm) then drill
6
4 wall screws and washers through
perforated holes into studs.
14
2
Base, Locker, Tool and Wall: 4 wall screws and 4
washers
Corner Wall: 6 wall screws and 6 washers
Align cabinet
4
to stud marks.
X4
Note:
Do not load cabinet
without first securing to
the wall.
Gather parts.
Wall Screw
(¼" x 2½")
Level cabinet.
5
Masonry.
• Follow steps 3 to 5.
• Drill 4 pilot holes through the
perforated strip with hammer drill &
masonry bit.
• Use 4 x ( 2 ¼" x ¼" )Tapcon Concrete
Anchor into wall. (Not Included)
• OR 4 x (#10 x 2" )Screw with 3/16"
masonry plug into wall. (Not Included)
• Follow Step 6.
Wall Washer
(¼")
Publicité
Table des Matières
