Installing Worktop Side Support Bracket - NewAge Products BOLD 3.0 Serie Mode D'emploi

Installing Worktop Side Support Bracket

Parts required
1 x Support bracket
4 X Washer
(1/4")
Align support bracket (Item 6) with the
2
holes.
Level the support bracket using a
4
Magnetic leveler.
16
1
2 X Hex Bolt
(1/4" x 5/8")
2 X Lock Nut
(1/4")
3
6
5
Locate holes on the side panel of the rack.
Fasten lock nuts (Item 4), bolts (Item 3),
and washers (Item 1).
4 1
Tighten the nut and bolt using a spanner.
X2
3