Installing Worktop Side Support Bracket - NewAge Products Bold 3.0 Serie Guide D'installation

Installing Worktop
Side Support Bracket
Parts Needed.
Support
Bracket
4 X Washer
(1/4")
2
Align bracket.
Level bracket and ensure it is at the
5
Same height as the base cabinet.
12
2 X Hex Bolt
(1/4" x 5/8")
2 X Lock Nut
(1/4")
Note: Support Bracket Sold Separately
A support bracket is to be used if the worktop is
added to the set without a secondary supporting
base/tool cabinet.
1
Open locker and locate holes on either side.
3
Fasten nuts, bolts, and lock washers.
4
Tighten nuts & bolts.
X2