Unpacking
• Begin by placing the package on a covered flat surface.
• Remove all cardboard, foam packaging material and clear plastic bags.
• Dispose / recycle all packaging materials.
• Verify all the contents in the box and gather the required tools. See "Tools Needed" , and
"Included Quantities" list.
Tools Needed
1 x Adjustable wrench
1 x 7/16" Socket driver wrench
1 x #2 Phillips head
screwdriver
1 x 12" Magnetic Level
1 x 7/16" socket
1 x
1 x Cordless
6 mm or 3/16"
drill bit
Power Drill
1 x Stud Finder
1 x Pencil
1 x Hammer Drill
[optional for masonry]
1 x Tape Measure
1 x #2 Phillips Bit
1 x Masonry Bit
3