Stacking - NewAge Products Performance 2.0 Serie Manuel D'installation

Stacking Cabinets
Parts Needed.
8 X Washer
(1/4")
2
Locate punch holes on adjoining
surface and insert bolts.
4 Tighten all bolts.
24
4 X Hex Bolt
(1/4" x 5/8")
4 X Lock Nut
(1/4")
Note: Do not exceed weight capacity of feet.
See page 5. Installing cabinets on stacked
cabinets is not recommended.
1
Position a second base cabinet on
top of an existing base cabinet.
3
Attach cabinets using the supplied
1/4" x 5/8" hex bolts, washers, and
nuts.