Angelcare AC423-D Manuel De L'utilisateur page 59

NO SOUND IS BEING TRANSMITTED
• Change to the following as some text regarding MUTE is duplicated:
• Ensure that both units are switched ON.
• Check that the sound has not been turned down on the Parent Unit. Increase the volume
level on the Parent Unit, refer to step 4.1.
• Check on the Parent Unit screen to see if the monitor is in temporary MUTE mode
instead of ON mode. Deactivate the temporary MUTE function, refer to step 5.3.
• If there is no power to any unit check/replace the batteries, recharge the Parent Unit
& check the AC Adaptors are working. Change electrical outlets if required.
• Bring the Parent Unit and Nursery Unit closer together.
NURSERY UNIT POWER ON INDICATOR (GREEN LIGHT) DOES NOT LIGHT UP
• Switch OFF and back ON the Nursery Unit.
• Check connections or change to another electrical outlet.
WEAK RECEPTION
• Bring units closer together.
• Change the position of one or both units.
• Place units on a flat surface away from baby's reach.
• Replace the batteries or recharge Parent Unit.
STATIC, DISTORTION, INTERFERENCES
(FROM OTHER MONITORS, WIRELESS PHONES, WALKIE-TALKIES, ETC...)
• Rotate Parent Unit or move it away from source of interference.
• Try a different channel, refer to step 3.
FEEDBACK (LOUD NOISES EMITTED FROM THE PARENT UNIT)
• Move units farther apart (at least 3 meters apart).
• Decrease volume on Parent Unit.
THE PARENT UNIT SCREEN IS BLACK (PARENT UNIT IS OFF)
• Turn the Parent Unit back ON by pushing and holding the power button.
• Replace the batteries or recharge Parent Unit.
All manuals and user guides at all-guides.com
Der Schutzengel im Kinderzimmer
AC423-D
E
N
59
07/17
®