DeWalt DCE080RS Mode D'emploi page 22

Pair the DEWALT ® Tool Connect™ application to the laser via a
3.
GB
Bluetooth ® connection.
First Time Pairing
1. On the DEWALT
Connect™ application, click
2. In the list of DEWALT product
types, select Rotary Laser.
3. Enter a Name for the rotary
laser (e.g., DW080LRS/LGS).
4. On the laser keypad, press
and hold for 3-5 sec until the
Bluetooth ® connection turns on
(blue LED starts blinking).
5. When the application lists
the laser's model number as IN
RANGE, select it.
NOTE:
If the Bluetooth ® connection does not turn on, replace the 18V
battery.
®
4. On the DEWALT Tool Connect™ application, select the
DCE080LRS/LGS rotary laser.
The DEWALT ® Tool Connect™ application will display information
5.
about the laser on the Diagnostics screen:
• If the current settings are one of the "favorite settings" you have
saved for the laser, it will display the name of that setting (e.g.,
Main St - Site 1).
• If the laser is dropped, disturbed, etc., it will send messages to
the Tool Connect™ application to inform you.
• If the Tracking feature is on, the application will know where the
laser is and will let you know if the laser has been taken and is
now out-of-range. (The Coin Cell battery enables the Tracking
feature.)
22
Paired Before
® Tool On the laser keypad,
. press to turn on the
Bluetooth ® connection.
Select ACTIONS.
6.
• If you are using more than one rotary laser and need to check
which laser is paired with the application, press the Identify
button at the bottom of the screen. On the paired laser, the
blue LED next to will blink.
• If you need to, you can enable, disable, or unpair the laser.
7. Select Rotary Control to change the setting for the rotary laser.
• When is selected, choose the rotation speed (150, 300,
600, or 1200).
15˚/45˚/90˚
• Select and choose the rotation angle (0, 15, 45, 90, or
360) and the rotation direction (
• Select and choose the Slope Setting, Axis Setting (X or
Y), Slope Configuration (% or degree), # degree or %.
8. Use your cell phone to control the laser.
When you are ready, turn the laser off from the Diagnostic screen.
9.
Controlling the Laser from up to 335m Away
You can use Bluetooth ® capability to pair the Detector DW0743DR (Red
laser) or DW0743DG (Green laser) with the DEWALT
application on your cell phone, and then use your cell phone to control
the laser (Figure ).
J 3
1. From either or
Tool Connect™ application to your cell phone.
On the laser keypad, press
2.
3. On the laser keypad, see if the blue LED next to
blue LED is already lit, the laser is probably already paired with
another smart device. You will need to unpair the laser from
the other device before you can pair it to the DEWALT
Connect™ application.
®
4. Pair the DEWALT Tool Connect™ application to the laser via a
®
Bluetooth connection.
or ).
® Tool Connect™
, download the DEWALT
to turn the laser on.
is lit. If the
® Tool
®