Running step 7 of 11...
Restarting se6000...
100% Complete
Requesting WBEM And Tomcat Services To Be Restarted
Please Wait...
100% Complete
WBEM And Tomcat Services Have Been Restarted
100% Complete
Successfully Completed.
Running step 8 of 11...
Updating DSP configuration...
Sending output to nohup.out
100% Complete
Running step 9 of 11...
Updating Rasagent configuration...
Sending output to nohup.out
100% Complete
Running step 10 of 11...
Updating Crontab & logs...
Running step 11 of 11...
Updating NTC configuration...
NOTE: Successful execution of this operation takes several
minutes.
Please be patient...
100% Complete
NOTE:
The NTC Configuration was successful.
The NTC will be
reinitialized in less than two minutes. Please press "Enter"
when prompted in order to proceed with configuration, then
log off.
Disconnect from the NTC, and wait approximately two minutes
before reconnecting.
If the following network verification is
successful, you may begin other configuration tasks.
Successfully Completed.
52
Guide de démarrage du système Sun StorEdge 6920 • Mai 2005