Fault Finding - User; Guarantee; Environment And Recycling - Stiebel Eltron SHW 200 S Notice D'utilisation Et De Montage

3. Fault finding
- user
Fault
No hot water.
No flow volume.
Tabelle 2
4. Fault finding
- qualified installer
Fault
No hot water.
Tabelle 3

5. Guarantee

For guarantees please refer to the pespective
terms and conditions of supply for your
country.
The installation, electrical connection
and first operation of this appliance
should be carried out by a qualified
installer.
The company does not accept liability for
failure of any goods supplied which accor-
dance with the manufacturer's instructions.
Cause
– No voltage.
– Dirt or limescale on the perlators in the
fittings or the shower heads.
Cause
– Safety temperature limiter has actuated.
– Rapid heating system not switching on.
– Heating element defective.
6. Environment and
recycling
Recycling of obselete appliances
Appliances with this label must not
be disposed off with the general
waste. They must be collected
separately and disposed off according to local
regulations.
Remedy
– Check the fuses in the house installation.
– Clean the drain fittings and/or remove
limescale.
Remedy
– Rectify the cause of the fault; replace the
regulator/limiter combination.
– Check the switch contactor and replace it
if necessary.
– Replace the heating element.
15