Epson EasyMP EMP-7850 Guide De Mise En Route page 27

Connecting Using Easy Connect Mode
Entering Letters and Numbers
Perform the following steps to enter letters and numbers.
1. Move the cursor to the item to input, and press the [Enter] button on the remote
control. The cursor turns green to indicate you are in input mode.
2. Press the [Num] button on the remote control to enter numbers only.
The [Num] button lights up and the remote control buttons change to numeric
keypad mode so that you can enter numbers.
To enter a period ( . ) press the [a] button from a space where characters can be
input.
period
When inputting characters, the order in which characters will change each time
the [
[ ] button down to change characters in reverse order. To set your target
character quickly, press and hold the [
characters.
3. To input subsequent numbers or letters, tilt the [
to the right. The first number or letter is selected and the cursor moves to the
second entry position.
4. After you have entered all the characters, press the [Enter] button on the remote
control to finalise the entry. The cursor will turn yellow.
26
Remote control
The buttons inside the box will
switch to numeric keypad mode
while the [Num] button is lit.
] button is tilted up, is: A-Z → 0-9 → symbols → a-z → space. Tilt the
Numeric buttons
] button to rapidly advance through
] button on the remote control