Bartscher 286.626 Mode D'emploi page 23

ATTENTION! Before doing any kind of maintenance or repairs, make sure that the
appliance is disconnected from the electric mains.
The following maintenance operations have to be carried out at least once a year by specialised
personnel. It is advisable to have a maintenance contract.
x Check the correct functioning of all control and safety devices;
x Check the condition of the power cable.
SUBSTITUTING COMPONENTS
ATTENTION! Before carrying out any substitutions, make sure that the appliance is
disconnected from the electric mains.
Power regulator
In order to replace the power regulator, remove the knob and the control panel. The power regulator
is placed on the back of the control panel, where it is fixed thanks to 2 screws. Remove the
component and replace it.
Heating elements (fig. 7, p. 4)
In order to replace the radiating heating element, remove the protection grid (1), which is fixed to
the radiating head thanks to 2 nuts. Take out the heating element; disconnect the electric cables;
remove the component and replace it. Then, connect the electric cables and handle the heating
element with care, because its external coating is quite fragile.
WHEN SUBSTITUTING ANY COMPONENTS, ONLY ORIGINAL SPARE PARTS
SUPPLIED BY THE MANUFACTURER HAVE TO BE USED. THE OPERATION HAS TO
BE CARRIED OUT BY AUTHORIZED PERSONNEL.
THE MANUFACTURER RESERVES THE RIGHT TO MODIFY WITHOUT NOTICE
THE FEATURES OF THE APPLIANCES DESCRIBED IN THIS MANUAL.
Pag. 22/36