Safety instructions
2
Safety instructions
The manufacturer accepts no liability for damage in the following cases:
•
Faulty assembly or connection
•
Damage to the product resulting from mechanical influences and incorrect
connection voltage
•
Alterations to the product without express permission from the manufacturer
•
Use for purposes other than those described in the operating manual
!
WARNING!
•
Never open the absorber unit. It is under high pressure and can cause
injury if it is opened.
•
Ensure clean and residue-free handling if silicone sealant or similar is
used. There is a risk of fire if silicone filaments come into contact with
hot parts or naked flames.
•
Do not operate the refrigerator if it is visibly damaged.
•
If the AC power cable for this refrigerator is damaged, it must be
replaced by the manufacturer, customer service or a similarly qualified
person in order to prevent safety hazards.
•
Never use a naked flame to check the refrigerator for leaks.
•
This refrigerator may only be repaired by qualified personnel.
Inadequate repairs may cause serious hazards.
•
Only use propane or butane gas (not natural gas).
•
Only operate the refrigerator at the pressure shown on the type plate.
Only use pressure controllers with a fixed setting that comply with the
national regulations.
•
Dismantle all refrigerator doors for the disposal of the old refrigerator
and leave the shelves in the refrigerator to prevent accidental enclo-
sure and suffocation.
12
RMD10
EN