Abicor Binzel CAT3 PRO CR Mode D'emploi page 24

EN Translation of the original German operating instructions
© The manufacturer reserves the right, at any time and without prior notice, to make such changes
and amendments to these operating instructions as become necessary due to misprints, inaccuracies
or product enhancements. Such changes will, however, be incorporated into subsequent editions of
the operating instructions.
All brand names and trademarks that appear in these operating instructions are the property of their
respective owners/manufacturers.
Our latest product documents as well as all contact details for the ABICOR BINZEL national
subsidiaries and partners worldwide can be found on our website at www.binzel-abicor.com
1 Identification
1.1 EC declaration of conformity
2 Safety
2.1 Designated use
2.2 Obligations of the operator
2.3 Personal protective
equipment (PPE)
2.4 Classification of the warnings
2.5 Emergency information
3 Product description
3.1 Technical data
3.2 Abbreviations
3.3 Nameplate
3.4 Signs and symbols used
4 Scope of delivery
4.1 Transport
4.2 Storage
5 Functional description
6 Commissioning
6.1 Attaching the CAT3 PRO
to the robot
6.1.1 Attaching the CAT3 PRO CR
to the robot
6.1.2 Attaching the CAT3 PRO TR
to the robot
6.2 Adjusting the TCP
6.3 Connecting the helix cable
EN - 2
EN-3 7
EN-4
8
EN-5
EN-5 9
EN-5 9.1
EN-5 10
EN-5
EN-6 11
EN-6 12
EN-7 12.1
EN-9 12.2
EN-10 12.3
EN-10
EN-11
EN-11
EN-11
EN-12
EN-13
EN-13
EN-14
EN-15
EN-16
EN-17
Operation
Putting out of operation
Maintenance and cleaning EN-18
Maintenance intervals
Troubleshooting
Disassembly
Disposal
Materials
Consumables
Packaging
BAL.0843.0 • 2021-02-26
CAT3 PRO
EN-17
EN-18
EN-18
EN-19
EN-21
EN-23
EN-23
EN-23
EN-23