Important Safeguards - Hamilton Beach 70550 Mode D'emploi

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed to reduce the risk
of fire, electric shock, and/or injury to persons, including the following:
1. Read and save all instructions.
2. This appliance is not intended for use by persons
with reduced physical, sensory, or mental
capabilities, or lack of experience and knowledge,
unless they are closely supervised and instructed
concerning use of the appliance by a person
responsible for their safety.
3. This appliance shall not be used by children. Keep
the appliance and its cord out of reach of children.
4. Close supervision is necessary when any
appliance is used near children. Children should
be supervised to ensure that they do not play with
the appliance.
5. To protect against risk of electrical shock, do not
immerse base, motor, cord, or plug in water or
other liquid.
6. Turn the appliance OFF( ), then unplug from
outlet when not in use, before putting on or taking
off parts, and before cleaning. To unplug, grasp
the plug and pull from the outlet. Never pull from
the power cord.
7. Avoid contacting moving parts. Keep fingers out
of discharge opening.
8. Do not operate any appliance with a damaged
supply cord or plug, or after the appliance
malfunctions or has been dropped or damaged
in any manner. Supply cord replacement and
repairs must be conducted by the manufacturer,
its service agent, or similarly qualified persons
in order to avoid a hazard. Call the provided
customer service number for information on
examination, repair, or adjustment.
9. The use of attachments not recommended or sold
by Hamilton Beach Inc. may cause fire, electric
shock, or injury.
10. Do not use your food processor if any part is
broken.
11. Do not use appliance outdoors.
12. Do not let cord hang over edge of table or counter
or touch hot surfaces, including stove.
13. Never feed food into food chute by hand when
slicing or shredding food. Always use food pusher.
14. Blades are sharp. Handle cutting blades carefully
when inserting or removing, emptying the
bowl, and during cleaning. Store out of reach of
children.
15. Make sure the blade or disc has come to a full
stop before removing cover.
SAVE THESE INSTRUCTIONS
2
16. Be certain cover is securely locked in place before
operating appliance.
17. To reduce the risk of injury, never place cutting
blade or disc on base without first putting bowl
properly in place.
18. Keep hands and utensils away from moving blade
and disc while processing food to reduce the risk
of severe personal injury and/or damage to the
food processor. A rubber scraper may be used but
ONLY when the food processor is not running.
19. Do not attempt to defeat the cover interlock
mechanism.
20. To reduce the risk of injury, be sure to insert or
remove blade and disc using hubs provided for
this purpose. Use caution when removing blade
and disc from the bowl, when emptying the bowl,
and when cleaning.
21. Be sure to turn switch to OFF position after each
use. Always use the pusher to clear the food
chute. When this method is not possible, turn the
motor off and disassemble unit to remove the
remaining food.
22. The appliance is not intended for commercial,
professional or industrial use. It is designed and
built exclusively for domestic use only.
23. Never use appliance for a longer period or with
a larger amount of ingredients other than that
recommended by Hamilton Beach Inc.
24. The maximum rating of this unit is based on using
the Chopping/Mixing Blade. Using the Slicing/
Shredding Disc may draw significantly less power.
25. Do not place on or near a hot gas or electric
burner or in a heated oven.
26. Do not use appliance for other than intended
purpose.
27. Be careful if hot liquid is poured into the food
processor bowl as it can be ejected out of the
appliance due to a sudden steaming.
28. Do not fill the bowl above the marked maximum
fill line (or rated capacity) to avoid risk of injury
due to damage to the cover or bowl.
29. CAUTION! In order to avoid a hazard due to
inadvertent resetting of the thermal cut-out,
this appliance must not be supplied through an
external switching device, such as a timer, or
connected to a circuit that is regularly switched on
and off by the utility.