Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Tightening torques
Description
Hub bolts FW*
EN
Throu-axle
Hub nut RW* (Alfine hub)
Clamping axle (Ludwig XIV,
Wilhelm)
Stem/ head tube clamp*
Stem/handlebar clamp
A-Head cap
Caliper (Road brake)
Caliper (Friedrich, Frieda)
Caliper (Ludwig XIV, Jacob)
Caliper (Wilhelm)
Brake lever (handle bar)
Brake pad (brake caliper)
Cable clamp (brake caliper)
Seat clamp
Seat post clamp* (frame)
Front sprocket (crank)
Rear sprocket RW
(freewheel lockring /
Wilhelm)
Pedals*
Bolts for drop out sledges
* always apply grease
42
Thread
Torque
Tool
M6
8 Nm
Hex key 5mm
3/8"
30 Nm
15mm open-end wrench
M5
7 Nm
Hex key 5mm
M6
10 Nm
Hex key 5mm
M5
5 Nm
Hex key 4mm
M6
2-4 Nm
Hex key 5mm
M6
8-10 Nm
Hex key 5mm
M6
8-10 Nm
Hex key 5mm
M6
9 Nm
Hex key 5mm
M5
6-8 Nm
Hex key 5mm
M5
4 Nm
Hex key 4mm
M5
5-7 Nm
Hex key 4mm
M6
4-5 Nm
Hex key 5mm
M6
8 Nm
Hex key 5mm
M6
8 Nm
Hex key 5mm
M8x0,75
15 Nm
Hex key 5mm
Hookwrench or
–
40 Nm
Schindelhauer tool
9/16"
35 Nm
Hex key 6mm
M8
10Nm
Torx 40
Care instructions
1. Please free your bike regularly from dirt. Please wash your Schindel-
hauer bike by hand. Never use a high-pressure washer.
2. If your frame is a pure aluminum one, it can turn matte or grey after
some time. If so, the frame can be brushed with a Non-Woven Abrasive
pad (240-400 grit) to return to original state. Please don't brush over
the logos.
3. To ensure a long durability of tires please keep the tire pressure as
stated on the sidewalls of the tire.
4. If your bike is featured with a leather saddle please note the enclosed
Brooks™ care instructions.
5. From time-to-time, the polished parts on the bike should be treated
with adequate care products so as to avoid discoloration.
6. For further information please contact your specialist dealer.
List of potential wear parts
• Brake pads
• Tires and tubes
• Front and rear sprockets
• Tooth belt
• Rims (especially on the brake surfaces)
• Grips
• Bearings
• Saddle
• Pedal griptape
Publicité
Table des Matières
