Special Features - Rohloff Speedhub - Schindelhauer Bikes Ludwig Notice D'utilisation

Special features – Rohloff Speedhub
This instruction applies to the model Ludwig XIV:
1. At first remove the shift box of the Rohloff Speed-hub (please also see
EN
Rohloff manual and fig. 19).
2. To do so, loosen the bolt as shown in fig. 18. Make sure the the non-
turn-washer (fig. 18, center) is in the correct position when inserting
the wheel again. Finally, tighten the Pitlock nut with tightening torque
as stated in the chart (p. 42).
18
36
Be aware not to pull the rear brake lever when the rear
!
wheel is not assembled!
19