Tightening Torques; Care Instructions; List Of Potential Wear Parts - Schindelhauer Bikes Viktor Notice D'utilisation

Tightening torques

Description
Hub bolts FW*
EN
Hub bolts RW*
Stem/ head tube clamp
Stem/handlebar clamp
A-Head cap
Brake caliper (frame, fork)
Brake lever (handle bar)
Brake pad (brake caliper)
Cable clamp (brake caliper)
Seat clamp
Seat post clamp* (frame)
Front sprocket (crank)
Rear sprocket RW
(fixed gear)
Rear sprocket RW
(freewheel lockring)
Pedals*
* always apply grease
38
Thread Torque Tool
M6 8 Nm Hex key 5mm
M6 12 Nm Hex key 5mm
M6 10 Nm Hex key 5mm
M5 5 Nm Hex key 4mm
M6 2-4 Nm Hex key 5mm
M6 8-10 Nm Hex key 5mm
M5 4 Nm Hex key 4mm
M5 5-7 Nm Hex key 4mm
M6 4-5 Nm Hex key 5mm
M6 8 Nm Hex key 5mm
M6 8 Nm Hex key 5mm
M8x0,75 15 Nm Hex key 5mm
M5 6-8 Nm Torx 25
Hookwrench or
BSA 40 Nm
SHB-Tool
9/16" 35 Nm Hex key 6mm

Care instructions

1. Please free your bike regularly from dirt. Please wash your Schindel-
hauer bike by hand. Never use a high-pressure washer.
2. If your frame is a pure aluminum one, it can turn matt or grey after some
time. If so, the frame can be brushed with steel wool or scotch brite pad
to return to original state. Please don't brush over the logos.
3. To ensure a long durability of tires please keep the tire pressure as
stated on the sidewalls of the tire.
4. If your bike is featured with a leather saddle please note the enclosed
Brooks™ care instructions.
5. From time-to-time, the polished parts on the bike should be treated
with adequate care products so as to avoid discoloration.
6. For further information please contact your specialist dealer.

List of potential wear parts

• Brake pads
• Tires and tubes
• Front and rear sprockets
• Tooth belt
• Rims (especially on the brake surfaces)
• Bearings