Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Indications, functions, and settings
D
5
6
9
A
14
4
13
NOTE ON CORRECTING PERPETUAL CALENDAR DISPLAYS (PUSH PIECE
• TO PREVENT DAMAGE TO YOUR WATCH, PLEASE PERFORM ALL SETTINGS AND CORRECTIONS WITH THE CORRECTION STYLUS
THAT WAS SUPPLIED WITH YOUR WATCH. ANY OTHER TOOL COULD DAMAGE YOUR WATCH.
• MAKE SURE TO SET YOUR WATCH TO 3 AM BEFORE CORRECTING DISPLAYS OR PERFORMING OTHER SETTINGS.
• THE SETTING SEQUENCE DESCRIBED BELOW MUST BE OBSERVED.
• FOR EVERY CORRECTION PROCEDURE, THE CORRECTOR PUSH PIECES MUST BE PUSHED ALL THE WAY IN AND THEN
TOTALLY RELEASED AGAIN.
Settings
PREPARATIONS PRIOR TO SETTING
6
4
B
1
10
7
8
C
3
12
2
11
8
7
DISPLAYS AND FUNCTIONS
1- MONTH
2- YEAR (IV = LEAP YEAR)
3- MOON PHASE DISPLAY
4- DAY/NIGHT INDICATOR
5- DAY OF WEEK
6- DATE
7- WINDING POSITION
8- HANDSETTING POSITION
9- SLIDE FOR ACTUATING THE STRIKING MECHANISM
10- CHRONOGRAPH PUSHER
11- 60-MINUTE COUNTER
12- CHRONOGRAPH HAND
13- SECOND HAND
14- 12-HOURS COUNTER
SETTINGS
A-
PUSH PIECE FOR DATE CORRECTIONS (6)
B-
PUSH PIECE FOR MONTH (1) AND YEAR (2) CORRECTIONS
C-
PUSH PIECE FOR MOON PHASE CORRECTIONS (3)
D-
PUSH PIECE FOR DAY OF WEEK CORRECTIONS (5)
A
) AND MOON PHASE DISPLAY (PUSH PIECE
• Before performing any corrections or settings,
always wind the watch (20 turns of the winding crown).
• Pull the crown (8) out.
• Advance the hands clockwise until the date hand (6)
switch forward by one day.
• Set the hands to 3 am.
The color of the day/night indicator (4) must be dark blue.
• Push the winding crown (7) home again.
C
):
Publicité
Table des Matières
