Operation; Selection Of The Anchor Point - Mittelmann UniDrive Mode D'emploi D'origine

Original Operating Instructions UNIDRIVE
EN 1496:2006/B
Directive 2006/42/EG
48x160m max. 100kg
5x160m max. 200kg
-40° C - +60° C
0158

15. Operation

The operating instructions of the products which are to be used with the UNIDRIVE are also applicable
independently of these operating instructions. The important parts, especially the function of the indi-
vidual products, can be found in them in detail.

15.1 Selection of the Anchor Point

To use the UNIDRIVE, anchor points each with a minimum load-bearing capacity of 10 kN are re-
quired (EU regulation). When being used outside the EU, the country-specific requirements for the
strength of the anchor points are applicable.
Number and year of the document with which the device com-
plies and the type and equipment class of the lifting device
Directive with which the equipment complies
Max. number of descents in accordance with equipment class A
Max. number of descents in accordance with equipment class B
Temperature range in which the device may be used
Symbol for information that the operating instructions must be
complied with
CE-Mark and Identification Number of the notified body involved
in the control of PPE:
DEKRA EXAM GmbH
Dinnendahlstraße 9
44809 Bochum
Page 31