Publicité
Les langues disponibles
Les langues disponibles
The flow rate of your pump is about 45 litres per minute. It may be accessed via the rear locker.
V 3-4-Hull drain hole:
Out of the water (on trailer, cradle, etc.)
Open position, drain plug removed.
In the water
Closed position, drain plug fitted.
(Make sure the drain plug is properly closed/tightened)
INSTALLATION AND CIRCUIT - DRAINING
WARNING!
The bilge pump system is not designed to keep in check water coming
from a breach in the hull. It is the owner's responsibility to have at
least one bailer on board with a system to prevent its accidental loss.
WARNING!
Regularly check that the bilge pump works (see instructions) and clean
the intake strainers of any debris likely to cause a blockage.
Page 54 / 73
Issue 3
Publicité
