4 GETTING STARTED (continued)
4.2 SELECTING YOUR LANGUAGE
1
Press and hold the ON/OFF button until the Elcometer logo is
displayed.
2
Select your language using the
3
Follow the on screen menus.
To access the language menu when in a foreign language:
1
Switch the gauge OFF.
2
Press and hold the left softkey and switch the gauge ON.
3
Select your language using the
5 CONNECTING YOUR PROBE
SEPARATE GAUGES ONLY
1
Rotate the probe plug to align the pins.
2
Screw in the collar - clockwise.
6 TAKING A READING
1
Hold the probe by its sleeve.
2
To take a reading, bring the probe down onto the surface whilst
holding it perpendicular.
3
For subsequent readings, lift the probe off and then replace it on
to the coated surface.
DO
•
Hold the probe by the probe sleeve.
•
Gently place the probe onto the surface.
•
Allow the sleeve to make contact with the surface - to improve
accuracy.
www.elcometer.com
2
1
softkeys.
softkeys.
2
1
en-4
R