Setting The Left/Right Volume Distribution (Balance); Adjusting The Front/Rear Volume Distribution (Fader) - Blaupunkt London MP48 Mode D'emploi Et De Montage

Adjusting treble frequency and level
u Press the AUD > button.
"BASS" appears on the display.
u
Press the or
until "TREBLE" appears on the display.
u button 4 once to reach
Press the
the TREBLE submenu.
u or button 4 repeatedly
Press the
until the desired treble frequency ap-
pears on the display.
u
Press the or
the level between -7 and +7.
u Press the AUD button < twice to exit
the menu.
Note:
If an Equalizer preset (POP, ROCK,
CLASSIC) is selected, the manual in-
crease of the treble level does not re-
sult in an audible change starting at a
certain setting. For further information,
please read the note in the section enti-
tled "Equalizer presettings (presets)".
Setting the left/right volume
distribution (balance)
To adjust the left/right volume distribution
(balance),
press the AUD > button.
u
"BASS" appears on the display.
u
Press the or
until "BAL" appears on the display with
the current setting.
u
Press the or
just the left/right volume distribution
(RIGHT/LEFT).
u Press the AUD button > to exit the
menu.
All manuals and user guides at all-guides.com
button 4 repeatedly
button 4 to adjust
button 4 repeatedly
button 4 to ad-
Adjusting the front/rear volume
distribution (fader)
To adjust the front/rear volume distribution
(fader),
u press the AUD > button.
"BASS" appears on the display.
u
Press the or
ly until "FADER" appears on the display
with the current setting.
u
Press the or
the front/rear volume distribution
(REAR/FRONT).
u Press the AUD button > to exit the
menu.
Sound
button 4 repeated-
button 4 to adjust
25