Sound; Adjusting The Bass; Adjusting The Middle; Adjusting The Treble - Blaupunkt London MP48 Mode D'emploi Et De Montage

Sound

Sound
You can adjust the sound settings (bass,
middle and treble) separately for each
source (radio, CD, CD changer, AUX).
The settings for X-BASS and the volume dis-
tribution are used for all audio sources.
You can adjust the volume distribution set-
tings separately for telephone/navigation.
Notes:
• If you want to adjust the volume of
"Bass", "Middle" and "Treble", fi rst
select the audio source for which you
want to use the settings.
• The settings of the sound and volume
distribution for telephone/navigation
can only be adjusted during a tele-
phone call/voice output.

Adjusting the bass

You can select one of four middle frequen-
cies (60 Hz, 80 Hz, 100 Hz, 200 Hz). In ad-
dition, you can adjust the level between -7
and +7 for the selected bass frequency.
Adjusting bass frequency and level
u Press the AUD > button.
"BASS" appears on the display.
u button 4 once to reach
Press the
the BASS submenu.
or button 4 repeatedly
u
Press the
until the desired bass frequency ap-
pears on the display.
u
Press the or
the level between -7 and +7.
u Press the AUD button > twice to exit
the menu.
24
All manuals and user guides at all-guides.com
button 4 to adjust
Note:
If an Equalizer preset (POP, ROCK,
CLASSIC) is selected, the manual in-
crease of the bass level does not result
in an audible change starting at a cer-
tain setting. For further information,
please read the note in the section enti-
tled "Equalizer presettings (presets)".

Adjusting the middle

You can select one of four centre frequen-
cies (500 Hz, 1 kHz, 2 kHz, 3 kHz). In ad-
dition, you can adjust the level between -7
and +7 for the selected centre frequency.
Adjusting centre frequency and level
u Press the AUD > button.
"BASS" appears on the display.
u
Press the or
until "MIDDLE" appears on the display.
u button 4 once to reach
Press the
the MIDDLE submenu.
u or button 4 repeatedly
Press the
until the desired centre frequency ap-
pears on the display.
u
Press the or
the level between -7 and +7.
u Press the AUD button < twice to exit
the menu.

Adjusting the treble

You can select one of four treble frequen-
cies (10 kHz, 12 kHz, 15 kHz, 17 kHz). In
addition, you can adjust the level between -
7 and +7 for the selected treble frequency.
button 4 repeatedly
button 4 to adjust