Placing The Device In Operation; Switching On/O; Volume; Operation - Blaupunkt BREMEN 975 Notice D'utilisation

Placing the device in operation

Caution!
Transport securing screws
Ensure that the transport securing screws at the top side
of the device are removed before the startup of the de-
vice.

Switching on/o

Switching on/o with the rotary/pushbutton
u For switch-on, press the left rotary/pushbutton.
u For switch-o , hold the left rotary/pushbutton
pressed for more than 2 seconds.
Switching on/o via vehicle ignition
If the car sound system is connected with the vehicle ig-
nition and it was switched o with the left rotary/push-
button, it is switched on or o with the ignition.
Note:
When switching the device on/o using the ignition,
you can use the Fast boot function (see chapter "Sys-
tem settings", option General). Fast boot shortens the
system start of the device to a few seconds.
When enabling Fast boot, selects the maximum time
period that may pass between switching o the
device and restarting it with fast system start. After
the time period expires, the regular system start is
executed upon switching it on again.

Volume

Adjusting the volume
You can adjust the volume in increments from 0 (o ) to
100 (maximum).
u Turn the left rotary/pushbutton to change the
volume.
Muting the car sound system (Mute)
u Brie y press the left rotary/pushbutton to mute the
device or to reactivate the previous volume.
Placing the device in operation | Operation

Operation

Touchscreen

Important note:
Do not use any pointed or hard objects, such as ball
point pens or fountain pens, to operate the touch-
screen.
The device features a capacitive touchscreen that pro-
vides a remote control and device buttons (see the sec-
tion "Controls" at the beginning of these instructions)
and allows operating the device.
Note:
Tap on the Night Display app to switch o the display
(the touchscreen goes dark). Tapping on the touch-
screen is su cient to return to the current display.
The Night Display app can be reached by tapping on
Apps in the main menu.
Tapping
To activate a control, e.g. a button, a slight touching of
the display surface is su cient. You do not have to exert
any pressure on the display surface.
•
Short tap:
A short tap on the display surface is su cient for
activating most of the controls.
•
Long tap:
Some functions require a long tap. Rest your nger-
tip on the display surface for approximately 1 second.
Swiping/scrolling
Some functions require swiping across the display
surface, e.g.
•
scrolling in lists,
• adjusting sliders.
Tap on the display surface and rest your nger on the
surface. Next, move your nger over the surface.
Zooming
When displaying maps (navigation) and images, you can
enlarge or reduce the view (zoom):
Tap on the area of the map display with two ngers and
rest your ngers on the surface. Move your two ngers
closer together (zoom out/reduce) or further apart
(zoom in/enlarge).
35