Tools Required - R&G LP0238BK Instructions

Page | 2
LEGEND
ITEM 1 = LICENCE PLATE BRACKET (TB0238) (x1).
ITEM 2 = RB0004 RUBBER GASKET (x1)
ITEM 3 = I0056 MINI INDICATOR ADAPTOR (x4).
ITEM 4 = LICENCE PLATE ILLUMINATOR (LA0002) (x1).
ITEM 5 = REFLECTOR (x1).
ITEM 6 = LICENCE PLATE ILLUMINATOR CONNECTOR (CON0014) (x1)
ITEM 7 = 150MM LENGTH OF HEATSHRINK (x3)
ITEM 8 = CLIP01 SELF-ADHESIVE CABLE CLIPS (x4)
Please note that in cases where kits are packed with rubber washers holding the components onto the bolt – the
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301
rubber washers should be thrown away!

TOOLS REQUIRED


Set of metric Allen keys.

Set of metric sockets and wrench.

MAXIMUM TORQUE SETTINGS




Unit 1, Shelley's Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Phillips screwdriver.
M4 Bolt = 8 Nm
M5 Bolt = 12 Nm
M6 Bolt = 15 Nm
M8 Bolt = 20 Nm
R&G
www.rg-racing.com Email: info@rg-racing.com