Subaru H101SSJ000 Instructions D'installation page 3

4
VEHICLE PREPARATION, continued
4. Using a panel removal tool, carefully lift upward to
disengage fi ve (5) pressure clips and then pull rearward
to remove the passenger's side ornament panel.
(FIGURE D)
5. Using a panel removal tool, carefully press downward
to disengage three (3) pressure clips to remove the
passenger's side under dashboard finisher panel.
(FIGURE E)
6. Using a Phillips screwdriver, remove six (6) Phillips
screws securing the glove box inner cover. Disengage
the six (6) pressure clips and disconnect the glove box
lamp connector to remove the glove box inner cover.
(FIGURE F)
PART NUMBER ISSUE
H101SSJ000
DATE
- 21 Dec 2021
FIGURE D
FIGURE E
FIGURE F
SUBARU OF AMERICA
3 OF 10