Direct Wire Connection - IKEA W10806909C Instructions D'installation

47.
Check door clearance
IMPORTANT: Check that top of door does not contact screws,
brackets, or countertop. If it does, adjust leveling legs or use
the side attachment option.
48.
Check inner spacing
Open door and check that space between dishwasher cabinet
opening, and tub is equal on both sides. If spacing is not equal,
loosen bracket screws and shift tub. Tighten bracket screws.
20

DIRECT WIRE CONNECTION

49.
Remove terminal box cover
Using a / " hex-head socket, nut driver, or Torx
1
4
screwdriver, remove terminal box cover. Retain for later use.
50.
Install strain relief
Install a UL Listed/CSA Approved metallic strain relief.
See the "Tools and Parts" section at the front of the guide
for part details and orders.
51.
Route cable into terminal box
Route cable so that it does not touch dishwasher motor or
lower part of dishwasher tub. Pull cable through UL Listed/
CSA Approved strain relief in terminal box. Strain relief is not
supplied with the dishwasher. Owner must purchase a
screw-in type strain relief.
Select UL Listed/CSA Approved twist-on wire connectors (not
included) rated to connect your household wiring to 16-gauge
dishwasher wiring.
T20
® ®
/ "
7
8