IKEA W10806909C Instructions D'installation page 21

WARNING
Electrical Shock Hazard
Electrically ground dishwasher.
Connect ground wire to green ground connector in
terminal box.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
52.
Direct wire – connect ground wire
Ground
wire
Form bare ground wire into a U-shaped hook. Wrap ground wire
hook clockwise around the ground connector screw and under
the dishwasher. Securely tighten ground connector.
53.
Direct wire – connect
remaining wires
Select UL Listed/CSA Approved twist-on wire connectors of
the proper size. See the "Tools and Parts" section at the front
of the guide for part details. Connect wires, black to black and
white to white, using the twist-on wire connectors.
NOTE: Do not pre-twist stranded wire. Twist on wire connector.
Gently tug on wires to be sure both are secured.
Ground
screw
Wiring configuration
54.
Direct wire – secure cable
in strain relief
Tighten strain relief screws to secure cable.
55.
Direct wire – reinstall terminal
box cover and wires
Place wires inside terminal box. Insert tabs on left side of
cover. Make sure wires are tucked inside box. Close cover
ensuring wires are not pinched. Use
screwdriver and previously removed screw to secure cover.
1 / " nut driver or Torx ® T20 ®
4
21