Ce Declaration Of Conformity - Nice TOONA 4 Serie Instructions Et Avertissements Pour L'installation Et L'utilisation

Declaration in accordance with the following Directives: 2004/108/EC (EMC); 2006/42/EC (MD) annex II, part B
Note - The content of this declaration corresponds to that specified in the official document deposited at the Nice S.p.A.
headquarters and, in particular, to the latest revised edition available prior to the publishing of this manual. The text herein has
been re-edited for editorial purposes. A copy of the original declaration can be requested from Nice S.p.A. (TV) I.
Declaration number: 288/TO
Manufacturer's Name: Nice s.p.a.
Address: Via Pezza Alta 13, 31046 Rustignè di Oderzo (TV) Italy
Person authorized to compile the technical documentation: Nice s.p.a.
Type of product: Electromechanical gear motor in the "TOONA" series
Model: TO4005, TO4006, TO4015, TO4024, TO4605, TO5015, TO5016, TO5024, TO5605, TO5624, TO7024, TO5024HS,
TO6024HS
Accessories: No accessory.
The undersigned Mauro Sordini as Chief Executive Officer, hereby declares under his own responsibility that the product
identified above complies with the provisions of the following directives:
• DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND COUNCIL of 15 December 2004 on the approximation
of the laws of Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC, in accordance
with the following harmonised standards: EN 61000-6-2:2005; EN 61000-6-3:2007 + A1:2011.
In addition, the product conforms to the following directive in accordance with the provisions applicable to partly-completed
machinery:
• Directive 2006/42/EC OF THE EUROPEAN PARLIAMENT AND COUNCIL of 17 May 2006 regarding machines and amend-
ing directive 95/16/EC (consolidated text)
– It is hereby declared that the pertinent technical documentation has been drafted in accordance with Annex VII B of Direc-
tive 2006/42/EC and that the following essential requirements have been met: 1.1.1 - 1.1.2 - 1.1.3 - 1.2.1 - 1.2.6 - 1.5.1
- 1.5.2 - 1.5.5 - 1.5.6 - 1.5.7 - 1.5.8 - 1.5.10 - 1.5.11.
– The manufacturer agrees to send the national authorities any pertinent information on partly-completed machinery, in re-
sponse to a motivated request, without affecting its intellectual property rights.
– If the partly-completed machinery is operated in a European country with an official language other than the language used
in this declaration, the importer must include a translation with this declaration.
– The partly-completed machinery must not be operated until the final machine in which it is to be incorporated is declared
to conform to the provisions of Directive 2006/42/EC, if applicable.
The product also complies with the following standards:
EN 60335-1:2012; EN 60335-2-103:2003 + A11:2009.
The parts of the product which are subject to the following standards comply with them:
EN 13241-1:2003 + A1:2011; EN 12445:2002; EN 12453:2002; EN 12978:2003 + A1:2009.
Oderzo, 30 October 2014
6 – English

CE declaration of conformity

and declaration of incorporation of partly-completed machinery
Revision: 5 Language: EN
Mr. Mauro Sordini
(Chief Executive Officer)