Ec Declaration Of Conformity - Nice SWN 70-24 Manuel D'installation Et D'utilisation

and declaration of incorporation of partly completed machinery
Declaration in accordance with the following Directives: 2004/108/EC (EMC); 2006/42/EC (MD) Annex II, Part B
Note
Number:
Manufacturer:
Address:
Person authorised to compile
the technical documentation:
Type of product:
Model / Type:
Accessories:
above comply with the provisions of the following directives:
In addition, the product conforms to the following directive in accordance with the provisions applicable to partly-completed machinery:
1.5.8- 1.5.10- 1.5.11
– The manufacturer undertakes to transmit, in response to a reasoned request by the national authorities, relevant information on the partly
completed machinery. This shall be without prejudice to the intellectual property rights of the manufacturer of the partly completed machinery.
declaration, a translation into that language must be provided by the person bringing the machinery into the language area in question.
The product also complies with the following standards:
The parts of the product that are subject to the following standards comply with them:
Oderzo, 2.03.16

EC declaration of conformity

Revision: 0 Language: EN
Nice s.p.a.
Via Pezza Alta 13, Z.I. Rustignè, 31046 Oderzo (TV) Italy
Nice s.p.a.
Electromechanical gear motor for industrial sectional doors
NDCMB001, NDCMB002, NDCMB003, NDCMB004, NDCMB006, NDCMH011, NDCMB012,
NDCMB013, NDCMB014, NDCMB016, NDCMB031, NDCMB033, NDCMB034, NDCMH038,
NDCMB043, NDCMB044, NDCMB053, NDCMB054, NDCMB063, NDCMB064, NDCMB082
Ing. Roberto Griffa
(Chief Executive Officer)
I