Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
temperature
maintenance
(where present)
the function
The function may only be activated
when the hydromassage is on
The water temperature value is regu-
larly monitored and appears on the
display
the function
When the hydromassage stops, the
maintenance system is automatically
disabled.
Water
T
his device helps you maintain the tub water temperature at a suitable temperature for
hydromassage.
system
activate
Hold down the key displayed: it becomes brighter and the maintenance system is acti-
vated (after a few seconds, the display will present the current water temperature).
The system maximum operation temperature is 40 °C (it is not possible to change this
value, it is only possible to disable the function).
Remember that the longer you use the hydromassage, the lower the water tem-
perature must be (refer to Chapter "Hydromassage - some recommendations").
stopping
To turn off the function, press the key displayed (the key brightness will dim).
41
35
35
Publicité
Table des Matières
