Sanitization - Jacuzzi muse Utilisation & Entretien

Sanitization

preliminary
operations
the function
The sanitization process cannot be in-
terrupted unless the power is discon-
nected via the main switch
During sanitization, the only availa-
ble function is the sound system
The water used for sanitization
must be emptied as the liquid irri-
tates the skin.
W
e recommend the J-MX 07 liquid, offered by Jacuzzi and available at the Assistance
Centres/Authorised Retailers, is used to clean the tub hydraulic circuit.
It is possible to carry out this cleaning operation using the same water used for the
hydromassage provided that soap, oils, cosmetics,have not been used; otherwise, empty
the tub and fill it once again.
In any case, the tub water level (free of concentrates) must cover the nozzles on the
backrest.
Check that the outlet nozzles along the tub perimeter are open.
Pour approximately 150 ml of J-MX 07 liquid into the tub water.
activate
Hold down the key displayed until it becomes righter and the other keys turn off: the
pump will activate (for approximately a minute) to ensure the liquid inside the hydraulic
circuit circulates.
35
The function lasts approximately 10 minutes and is completely automatic; about one
minute before the end of the function, the pump activates once again to rinse the pipes.
When the key begins to flash, the function is considered complete: open the drain and
empty the tub.
44
J-MX 07
10 min