Flushing The Unit; Before You Begin - WAGNER PaintREADY Station Manuel De L'utilisateur

Flushing the unit

Before you begin:

IMPORTANT: Never clean air cap or air holes in the
nozzle with sharp metal objects. Do not use solvents or
lubricants containing silicone.
Special cleanup instructions for use with
flammable solvents (must have a flashpoint
above 70ºF (21ºC):
To Flush the Unit:
IMPORTANT: If you cleaned the sprayer using mineral
spirits, repeat steps 1-6 using warm, soapy water.
Move on to "Cleanup - Cleaning the Nozzle", next page.
4
English
12
Cleanup
5
Empty waste
container
1
1/2
PULL
2
3
6
1/2
PULL