Installation - LAVAZZA EP 2100 Manuel Pour L'utilisateur

GB
Position the machine on a flat, horizontal surface.
Remove the access lid on the right of the tank using the key supplied (Figure 1); release
the central lid (Figure 2), remove the tank (Figure 3) and fill it with drinking water
(preferably with a low lime content).
Power the machine by connecting its lead with the electrical outlet (Figure 4).
Move the switch on the back of the machine to position "I" (Figure 5).
Remember to connect, first, the feeder to the machine, then the feeder must be
placed into the wall socket, then you turn it on. To move the machine, you
have to turn the switch to the position "0", after you have to disconnect the
wall socket and finally you have to separate the feeder from the machine.

INSTALLATION

Fig. 1
Fig. 4
CAUTION
Fig. 2
12
Fig. 3
Fig. 5