Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Operating Instructions
Outdoor Bullet Wi-Fi Camera
1080p IP65
Item No. 2267528
Intended use
This device is an outdoor Wi-Fi camera that works
through a WLAN network and the "Smart Life - Smart
Living" mobile application software. Motion sensors
trigger push notifications to your mobile device and
an infrared camera will activate when light levels
drop below a certain level.
Using a microSD card (not included), short video
clips can be saved when the motion sensor is acti-
vated. The IP65 rating offers protection against dust
and rain.
For safety and approval purposes, you must not re-
build and/or modify this product. If you use the prod-
uct for purposes other than those described above,
the product may be damaged. In addition, improper
use can result in short circuits, fires, electric shocks
or other hazards. Read the instructions carefully and
store them in a safe place. Make this product avail-
able to third parties only together with its operating
instructions.
This product complies with the statutory national and
European requirements. All company names and
product names are trademarks of their respective
owners. All rights reserved.
Delivery content
•
Camera
•
Bracket
•
4x Screws for wall mounting
•
4x Dowels
•
Operating instructions
Up-to-date operating instructions
Download the latest operating instructions at
www.conrad.com/downloads or scan the QR code
shown. Follow the instructions on the website.
Explanation of symbols
The symbol with the lightning in the
triangle is used if there is a risk to your
health, e.g. due to an electric shock.
The symbol with the exclamation mark in
the triangle is used to indicate important
information in these operating instruc-
tions. Always read this information care-
fully.
The arrow symbol indicates special in-
formation and advice on operation.
Safety instructions
Read the operating instructions
carefully and especially observe
the safety information. If you do not
follow the safety instructions and
information on proper handling in
this manual, we assume no liability
for any resulting personal injury or
damage to property. Such cases will
invalidate the warranty/guarantee.
a) General information
• The device is not a toy. Keep it out of the reach of
children and pets.
• Do not leave packaging material lying around
carelessly. This may become dangerous playing
material for children.
• Protect the appliance from extreme tempera-
tures, direct sunlight, strong jolts, high humidity,
moisture, flammable gases, steam and solvents.
• Do not place the product under any mechanical
stress.
• If it is no longer possible to operate the product
safely, take it out of operation and protect it from
any accidental use. Safe operation can no longer
be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor
ambient conditions or
- has been subjected to any serious transport-
related stresses.
• Please handle the product carefully. Jolts, im-
pacts or a fall even from a low height can damage
the product.
• Consult an expert when in doubt about the opera-
tion, safety or connection of the appliance.
• Maintenance, modifications and repairs must only
be completed by a technician or an authorised re-
pair centre.
• If you have questions which remain unanswered
by these operating instructions, contact our tech-
nical support service or other technical personnel.
b) Power adaptor
• The mains outlet must be located near to the de-
vice and be easily accessible.
• As power supply, only use the supplied mains
adaptor.
• Only connect the power adaptor to a normal
mains socket connected to the public supply.
Before plugging in the power adaptor, check
whether the voltage stated on the power adap-
tor complies with the voltage of your electricity
supplier.
• Never connect or disconnect power adaptors if
your hands are wet.
• Never unplug the power adaptor from the mains
socket by pulling on the cable; always use the
grips on the plug.
• When setting up the product, make sure that the
cable is not pinched, kinked or damaged by sharp
edges.
• Always lay the cables so that nobody can trip over
or become entangled in them. This poses a risk
of injury.
• For safety reasons, disconnect the power adaptor
from the mains socket during storms.
c) Privacy and surveillance
• It is the responsibility of the user to be aware of
all applicable laws and regulations that prohibit or
limit the use of cameras, and to comply with the
applicable laws and regulations.
• Recording and circulating an image of an individ-
ual may constitute an infringement of their privacy
for which you may be held liable.
• Ask for authorization before filming individuals,
particularly if you want to keep your recordings
and/or circulate images on the Internet or any
other medium.
• Do not circulate degrading image(s) or one which
could undermine the reputation or dignity of an
individual.
• In your country it may be a legal requirement to
display a warning when using surveillance cam-
eras on your property. In such cases it is impor-
tant to display a warning sticker where potential
intruders can see it.
• You should not point cameras where surveillance
extends to public areas, and video recordings
should not identify people in a public space.
Operating elements
1
2
3
4
5
6
7
1 Compartment cover
2 Speaker
3 Inside compartment
Micro SD card slot (card not included)
Reset button
4 Microphone
Installation
Important: Remove the camera screen protector film before use.
a) Choosing a location
•
The camera recording angle and sensor detection angle is affected by the placement of the device.
•
Check that the device is within range of your Wi-Fi access point. Use of other 2.4 GHz products e.g.
wireless networks and microwave ovens may cause interference.
•
You may need to set up a wireless repeater to improve the connection.
•
The power cable is 2.3 m long. Make sure there is a suitable power outlet close enough to your mount-
ing location.
b) Power supply
Important
•
Do not use a USB port of a computer, keyboard, or USB hub without a power adapter as the
current supplied by these ports is insufficient.
•
If used outdoors, the cable and the adapter must be protected against water and dust.
c) Mounting
Check that the provided screws are appropriate for the surface material. If in doubt consult a
professional.
1. Use the holes on the mounting plate as a template to mark where to drill.
2. If needed, insert the plastic dowels using a mallet.
3. Fix the mount to the wall using the supplied screws.
4. Screw the device onto the mount.
5. Make sure the device is securely attached to the mounting bracket before letting go.
d) Ingress protection
• The device has an IP65 rating. It is protected
from dust, and low pressure water jets from any
direction.
• To maintain the ingress protection rating:
- The power cable should be connected to the
adaptor in a weatherproof socket box, or rout-
ed indoors via a weatherproofed cable inlet.
- The compartment cover should be properly
sealed.
e) Mounting
• Before drilling, check for concealed wires or pipes
beneath the surface that could be damaged or
cause harm.
9
8
5 8x IR LED (behind tinted cover)
6 Lens
7 Light sensor
8 USB power cable
9 Bracket mounting points
Publicité
Table des Matières
