Monaco P200TE Manuel D'utilisation page 64

Chapter 4 - Technical Specification
4.1.2 Connections
These connections are
NOT
1
M13385001
2 3
FIGURE 18: Sample of the connection label
No. Description
Mains power cable and switch
1
Protective earth must be fitted.
l
U.K. Power Cable Fuse: 13A
l
2 Network cable
3 Hand control and Optos Service use
4 Touch screen
4.1.3 Scan head dimensions
The scan head, hand control and touch screen should be placed on a table which meets the table specification,
see Table requirements on the facing page . There should be adequate clearance around the table to operate
the device.
The image server, switch and any browser-based review clients or monitors must be positioned outside the
patient environment; more than 1.5 meters (5 ft) from the scan head.
TABLE 8: Scan head dimensions
Dimension
Width
Depth
Height
Weight
Door access width
Page 64 of 76
English
intended to be detached by the user.
100-240V AC
T5A H250V
4
Details
550 mm (22 inches)
570 mm (23 inches) including chin rest
608 mm to 632 mm (24 inches to 25 inches)
40 kg (89 lbs)
760 mm (30 inches)
Part Number: G108707/8GCA
Copyright 2018, Optos plc. All rights reserved.