Publicité
Les langues disponibles
Les langues disponibles
Chapter 3 - How to...
1. Exit OptosAdvance.
2. Select the "Windows" button.
3. Select
Restart
.
3.1.3 Use the system
Before setting up and capturing images, ensure you are familiar with the device and equipment.
3.1.3.1 Using the touch screen
The touch screen is connected to the scan head and controls the scan head and capture functionality.
Some of this functionality is also available on the hand control, see Using the hand control on the facing page .
The options are selected by touching an option or pushing the control in the required direction.
TABLE 2: List of touch screen icons
Icon
Description
Declutter
Removes all icons to show a full sized image. Select the icon again to show all the controls.
Save and recapture
Saves and recaptures the previous image or scan.
Discard
Deletes the current image or scan.
Image Browser
Displays the images and scan which will be saved at the end of the session. You can change
laterality and delete images and scans.
Change laterality
Changes the laterality of the captured image.
Cancel
Cancels the current action without saving changes.
Finished
Completes the current action.
Shut down device
3.1.3.2 Using the touch screen keyboard
The touch screen keyboard uses the same layout as a standard keyboard in your language.
As needed, accented or special characters may be available by pressing and holding keys with a symbol in the
upper right corner.
Page 32 of 76
English
Part Number: G108707/8GCA
Copyright 2018, Optos plc. All rights reserved.
Publicité
