Publicité
Les langues disponibles
Les langues disponibles
2.6.1 System parts
2
3
4
5
6
7
FIGURE 1: P200TE device connected to network
No. Name of Part
1
Scan head
2
Head rest
3
Face pad
4
Chin rest
5
Status indicator
6
Touch screen
7
Hand control
8
Image server
9
Customer network
Patient
10
environment
1. Super Luminescent Diode
Part Number: G108707/8GCA
Copyright 2018, Optos plc. All rights reserved.
1
Description
The scan head comprises the light sources (lasers and
used to capture patient images.
The head rest supports the patient's head when the patient is being imaged, see
Using the chin rest and head rest on page 34.
The face pad helps support the patient when the patient is being imaged.
The chin rest supports the patient's head when the patient is being imaged, see
Using the chin rest and head rest on page 34.
The color changes to show the status of the device, see Status indicator on
page 55.
The touch screen monitor is used to interact with the system. It displays
alignment feedback and captured images.
The hand control comprises buttons used to adjust the patient alignment and
capture images.
Runs the
OptosAdvance
The image server will also let you review and analyze patient images.
Switches, Firewalls, Internet access, Review clients, Virtual image server (if
required)
The image server, switch and any browser-based review clients or monitors must
be positioned outside the patient environment; more than 1.5 meters (5 ft) from
the scan head.
8
10
software and lets you manage the networked images.
Chapter 2 - Introduction
9
1
SLD
) and electronics
Page 23 of 76
English
Publicité
