Using Your Hand Mixer - Russell Hobbs RHM500 Manuel D'instructions

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

OPERATING INSTRUCTIONS
FITTING THE BEATERS & DOUGH HOOKS
Remove the plug from the power outlet. Set the speed switch to "0" / "OFF".
Insert the two beaters (G and H) into body of appliance, turn slightly until they
engage. If using the dough hooks, insert the two dough hooks (E and F) into the
corresponding holes and turn slightly until they engage. Never use the beaters
and dough hooks together.
NOTE: The right and left beaters or dough hooks are not the same. The right has a ring
and the left does not. Do not interchange the left and right with each other.

USING YOUR HAND MIXER

The Russell Hobbs Esse hand mixer is perfectly suited for preparing dips, sauces,
whipping cream, cake mixtures and the like.
1. Ensure the hand mixer is unplugged and the speed control is set to "0" / "OFF".
2. Put the ingredients into a durable, deep enough mixing bowl, which is sufficiently
tall and wide to avoid splashing. For best results, use a medium-sized, high-
sided bowl.
3. With the speed control still set to "0" / "OFF", plug the unit into the mains power
supply,
NOTE: Do not operate the hand mixer before inserting it into the food being mixed.
4. Dip the beaters or dough hooks into the mixture as deep as possible so as to
avoid splashing.
NOTE: Do not immerse the hand mixer into food or liquid beyond the length of the
mixing tools. No liquid or food must touch the mixer body.
5. Set the desired mixing speed by moving the speed selector dial to the right, from
1 for a low speed to 5 for MAX speed. We recommend first starting on a low
7

Publicité

Table des Matières
loading

Table des Matières