Cleaning And Maintenance - Russell Hobbs RHM500 Manuel D'instructions

CLEANING AND MAINTENANCE


This hand mixer is for household use only and is not user-serviceable.

Do not open or change any parts by yourself. Please refer to a qualified electrical
service department or return to the supplier if servicing is necessary.

Always remember to unplug the unit from the electrical outlet when not in use
and before cleaning. Ensure that the speed control is set to "0" / "OFF".

It is much easier to clean the accessories directly after they have been used.
Wash them in warm, soapy water, rinse and dry well.

The body of the hand mixer should be cleaned with a damp cloth. Do not let
water enter the hand mixer.

Do not use bleach or other abrasive substance or solvents to clean your hand
mixer as it can be damaging to the finish.

Do not immerse the mixer in water or any other liquid, or hold it under a running
tap to clean.

To remove stubborn spots/marks, wipe the surfaces with a cloth slightly
dampened in soapy water or mild non-abrasive cleaner. Rinse and dry a clean,
dry, soft cloth.
10