weewell WMV850 Mode D'emploi page 5

6. Next Sound: Press the button to play next tune.
7. Auto/ Manual Record: Press to
automatically/manually record
during monitoring. Only available
when the Micro SD card is inserted.
(Not included) REC[A]:Start record-
ing when an alarm is detected.
REC[M]:Start recording when the
button is pressed
8. Auto/Manual Channel: Press the
button to choose a channel mode
Scan/Delete Button: When the
9.
Scan button is pressed, the LCD
Screen is turned off and the system continuously scans all available cameras
while the monitor is dark. The SCAN feature can be used for the following two
reasons: (1) To prevent the user from being disturbed (i.e. when sleeping) by the
bright LCD screen, or (2) To conserve battery power. If audio is detected above
the preset audio trigger level on the Camera(s)*, the Receiver will beep and
display the triggered Camera. The receiver will return to Scan mode about 8
seconds after the Alarm has completed. Press any button except "Power" on the
front panel of monitor will exit Scan Mode.
Navigation Controls/OK Button:
10.
Viewing Mode and Menu Modes:
Viewing Mode: The following controls are used while watching live video
from the camera:
When the image size is set double by selecting Zoom*2, press the
navigation button to view the parts out of the LCD screen. In this mode,
one can also adjust the volume of LCD. When playing video, press the UP
v to play/pause and press DOWN V to stop it. Press the LEFT arrows to fast
forward the recorded file. Press RIGHT arrow to fast backward the recorded
file.
Menu Mode: Use the UP/DOWN/LEFT/RIGHT vVY arrows to navigate in
Menu Mode. Press the OK Button to confirm the menu selection.
All manuals and user guides at all-guides.com
Use the controls to move or select while in
WMV850 USER MANUAL
I
5