Signal Indicators; No Signal Warnings - weewell WMV850 Mode D'emploi

Signal Indicators

2. Channel Indicator: Indicates the number of the camera that is displayed on
the current screen. Press "M" Button on the Receiver to switch between available
cameras.
SD card indicator: When the receiver is recording, the red indicator zREC
3.
will be shown on the LCD screen. And you can see the name of the recorded file
beside the indicator.
4. Temperature Indicator: Shows the ambient temperature where the wireless
camera is installed.
5. File Name: When doing recording, the name of the recorded file will be shown
on the LCD.
6. SD card record: When a SD card is inserted into the SD card slot, the indicator
will be shown on the LCD screen.
New Record Indicator: When there is new recorded file, the indicator will be
7.
shown on the LCD screen and flashes to alert users.
NOTE: To automatically switch between channels, press "A/QUAD" Button.

No Signal Warnings

When the Camera is positioned too far from
the Receiver, warning messages will be
displayed:
All manuals and user guides at all-guides.com
WMV850 USER MANUAL
I
11